Apr 2, 2023 · Instead, Ryan doubled down on the 86’s Toyota DNA with the unmistakable 2JZ inline-six. And this is no mild 2J. It displaces 3.4L thanks a Brian Crower stroker kit. A single Garrett G35-1050 turbocharger feeds the oversized, beefed-up 2JZ, and all together the setup is good a tire-shredding 678hp.

Feb 24, 2017 · Fredric “The Norwegian Hammer” Aasbo set out to build his ultimate drifting GT86 powered by a turbocharged 2JZ-GTE.

Feb 8, 2019 · There are quite a few good threads here with pictures and instructions. Contact Pure Automotive Performance for the best parts. Also, keep in mind the price point. In my opinion, you will need an absolute minimum of $20,000 to swap it properly. That doesn't include some fab work you may pay for, assuming you can't do it yourself.

Aug 29, 2017 · The GT86 received an HKS 3.4 liter Capacity Upgrade Kit for the 2JZ. It features an HKS forged billet full-counterweighted crankshaft with a 94mm stoke.

Swapping a 2JZ into any car is not for the faint of heart. It requires a laundry list of parts to make it fit right, run right, and drive right. Physically putting the engine into the car is fairly easy using all of our swap parts. Buying Go-Fast parts for your 2JZ engine is pretty straight forward.

Jun 16, 2015 · It's a drag race clip where the super-powered GT 86 sets a blistering quarter-mile time in the 9-second range. The trap speed is 256 km/h (158 mph), which means this is a seriously fast car.

May 11, 2020 · Alex Golovnya built his Toyota GT86 to drift at ChepaRacing in Kiev, Ukraine. The car is powered by a 3.4 L 2JZ inline-six producing 1046 horsepower and 1028 Nm (758 lb-ft) of torque to the hubs on 109 octane fuel tuned by Oleg Zaytsev at SJRacing. The motor features a Plazmaman intake manifold, ID2600-XDS injectors, Garrett G35-1050 ...

ekanooracing toyota gt86-2jz runs 9.1 @ 256 km/h ( 159 mph ) engine mods bone stock block with ekanooracing street custom heads & hks 272 cams ,ekanoo racing...

We made this kit specifically because the FA20 is highly unreliable and does not support modifications past 500hp. The Toyota 1JZ and 2JZ engine are highly reliable up to 800hp and fit great into this chassis with our engine mounts and transmission tunnel crossmember reinforcement bracket system.

Mar 27, 2024 · The goal is to take the FA24 and put in a built 2jzgte, with a ford 8.8 rear end, and a T56 trans. Now this wont start for about 2 years. 1 Year to pay the car off and the 2nd year to save and be able to start throwing money at the build.

Jan 18, 2016 · EKanoo have done it again, posting a new import 1/4 mile 2JZ world record making it the world’s quickest and fastest import with the mighty 2JZ! Best E.T – 5.77 @ 399kph (248mph) Best trap speed – 5.82 @ 400kph (249mph)

Aug 13, 2018 · Under the hood sits a 3.0 L 2JZ inline-six with a Garrett GTX35R turbocharger. The engine was tuned by MPS Engineering in Dülmen, Germany to make 706 horsepower and 679 lb-ft (921 Nm) of torque to the wheels on 24-26 psi (1.7-1.8 bar) of boost and E85 fuel.

Sep 30, 2022 · Not only did he do it about as good as it could be done without going insane on the budget, you can just tell he’s a hardcore veteran street racer. During the demo drive, he looks like a robot continuously scanning for cops and checking his six. I thoroughly enjoyed watching this! ¡Viva la libertad, carajo! ¡DOGE, bebé DOGE!

Apr 12, 2017 · The difference is, with the MoTeC M1 Series you can get a custom firmware that was designed and tailored to the car ahead of time instead of a blank ecu with a generic software for you to fill out from scratch. The MoTeC is 100% Proven on 2 …

Jan 16, 2020 · Before the new Supra arrived, Toyota’s solely purpose-built sports car was the 86 (or GT86 or FT86 or Subaru BRZ or Scion FR-S, if you wish). In the U.S., the 2020 86 makes 200 or 205 horsepower...

Mar 5, 2018 · Australian drifter Beau Yates has competed for several years in his very powerful 2013 Toyota GT86. Under the hood sits a 3.0 L 2JZ inline-six built by JHH Racing that makes 750 horsepower. The engine features Carillo rods, JE 9.5:1 pistons, CNC ported head, Ferrea valvetrain, Hypertune intake manifold, Hypertune 90 mm throttle body, and ...

The AE101 turned GT86 features an interesting setup with the engine being positioned as far back in the engine bay as possible to help with weight distribution. But what other issues crop up with having the engine so far back?

May 3, 2024 · CBS Racing built this Toyota GT86 for drifting at their company in Schijndel, Netherlands. Under a Seibon carbon fiber hood is a Toyota 2JZ-GTE VVT-i inline-six neighbored by a Garrett GTX3582R Gen 1 turbocharger. It runs on a Ecumaster Classic ECU and cooled by rear-mounted radiator.

Jan 11, 2025 · Hi guys! Building a 2JZ 600-700 HP GT86, street version. So no drift, no drag etc. Just a cool car with "Robot Craftsman" bodywork and big perfomance. I was interesting in, which suspension do you guys think will better fit my case? Thinking of Wisefab or IRP.

Sep 12, 2017 · This Toyota GT86 was built by FFF Drifting Department and FNATZ Garage for Italian pro drifter Federico Sceriffo. The car is powered by a 3.0 L 2JZ-GTE inline-six with a large BorgWarner turbocharger and rides on a Öhlins Racing …