Classics for a Cause's latest offering is this stunning example of one of Australia's favourite old-school cars ...

The first video provides a step-by-step tutorial on how to install a Wilwood hydraulic clutch master ... the installation of a distributor for a roller cam. The third video dives into the TREMEC ...

The included hydraulic roller camshaft provides up to 0.618 inches of lift with up to 248 degrees of duration. The 427 Boss Crate Engine is available in long block form and includes components ...

The hydraulic roller lifters used by the fifth-gen 6.7 ... The roller at the end of the lifter makes contact with the camshaft, rolling around the cam lobes. The lack of needle bearings and ...

With the availability and efficiency of roller camshafts it’s a no-brainer to use a hydraulic roller setup even on the simplest of engine combinations. The roller lifters take a lot of load off ...

The cam hit the top of the front bumper before it was all the way out of the block. So, it was time to pull off more parts. See All 18 Photos 9.The old flat tappet and new hydraulic roller cams ...

So we added a Lunati hydraulic roller camshaft, lifters, stronger dual springs, and reused the Lunati roller rocker arms from the flat-tappet test. This also worked extremely well, pushing the ...

Once you've got a grasp of the terms and basically how a cam works, this story will make a lot more sense. Roll OnThe new car companies were the ones who made hydraulic roller cams popular.