The hole for the sprinkler valves should be about 18 inches deep and 3 feet wide. It is best if it is in a central spot, as it makes it easier to direct the water to the various zones.

Your sprinkler system might also have valves to prevent backflow. If it does, shut those off, too. 2. Stop the Timer. There’s a good chance that your sprinkler system runs on an automatic timer.

Now, you need to find the sprinkler station that’s the highest and furthest away from the compressor and switch it on. 5. Next, you need to close the backflow isolation valves .

Come winter, those hoses, pipes, and valves are susceptible to the cold. As the first frost approaches, it’s important to think about the steps you need to take to send your system into ...

Valves are essential for any plumbing system, so if you notice the control valve for the sprinkler isn't working properly, this is a significant problem that needs to be addressed as soon as possible.

When to blow out winterize turn off lawn yard sprinkler system for autumn fall winter Colorado lawn care tips how to turning off backflow preventer valve sprinklers. Skip Navigation Share on Facebook ...

A sprinkler system employing automatic sprinklers attached to a piping system containing air that may or may not be under pressure, with a supplemental detection system installed in the same areas as ...

READ MORE: How to prepare your home for winter, freezing temperatures. Bob Skradski, who owns Sprinkler-Tek in Omaha, showed KETV how to blow out sprinklers. "What you want to do is hook up the ...

CR’s take: The Orbit B-Hyve 57950 looks like a traditional sprinkler controller but is plenty smart. It earns a top rating in our tests for convenience because of its easy-to-use controls and ...

Your sprinkler, drip system, and hoses are likely made up of PVC, poly, and plastic. While those materials are fairly resilient to weather changes, the water that flows through them is not.