The angles of the teeth keep the teeth in constant contact with one another, which makes the gears quiet. For reverse gear, most transmissions use spur gears, also known as straight-cut gears.

The reverse slider has minute gear tooth damage, which is easily overlooked during a rebuild. See All 37 Photos 14.Coffey stresses close examination of gear teeth and synchronizers for damage and ...

The rod can be slowly turned by hand to adjust the workpiece position, to allow the gear teeth to be cut to an appropriate depth. The method of action is simple. As the tap turns it not only cuts ...

The rod can be slowly turned by hand to adjust the workpiece position, to allow the gear teeth to be cut to an appropriate depth. The method of action is simple. As the tap turns it not only cuts ...

Transmission gears—providing typically five or six speeds—have the highest tooth-to-tooth pressures because the torque ...

Meanwhile, Reverse engages the reverse gear and should be selected when backing from a spot, and Drive is for moving forward. In addition, some vehicles have a lock button in the gear selector ...

Each gear tooth has a vertical cut in each tooth is causing each tooth to grind down faster. Last year I paid $72?! For a new steering shaft with the gear on it. It too came with those grooves in ...